Replacing A Pad - Huawei FusionModule1000A40 ICT Solution Maintenance Manual

FusionModule1000A40 ICT Solution
Maintenance Guide
Materials: new WiFi converter of the same model
Documents: none
Skill requirement: extra low voltage (ELV) engineer
Procedure
Step 1 Label each cable based on the corresponding ports on the WiFi converter.
Step 2 Remove the cables and antenna from the WiFi converter.
Step 3 Remove the old WiFi converter from the guide rails.
Step 4 Install the spare WiFi converter in the original position and connect the cables and antenna.
Step 5 Log in to the ECC800 WebUI, choose System Settings > WiFi Management, enable the
WiFi function, and set the WiFi SSID and password according to the customer plan.
Step 6 Check that the app can be connected properly.
----End
Follow-up Procedure
Dispose of the removed WiFi converter that is confirmed faulty.

4.3.14 Replacing a Pad

Prerequisites
A spare pad of the same model is available and functional.
Impact on the System
None
Preparations
Tools: ESD wrist strap, ESD gloves, label, marker
Materials: new pad of the same model
Documents: none
Skill requirement: extra low voltage (ELV) engineer
Procedure
Step 1 Install the app on the spare pad and connect the pad to the network over the WiFi hotspot of
the data center.
Step 2 Specify the user name and password for the APP on the spare pad and log in to check that the
app works properly.
Step 3 Remove the old pad from the support and install the spare pad on the support.
----End
Issue 01 (2019-03-05) Copyright © Huawei Technologies Co., Ltd.
4 Parts Replacement
117