Huawei FusionModule1000A40 ICT Solution Maintenance Manual page 120

FusionModule1000A40 ICT Solution
Maintenance Guide
1.
2.
3.
4.
Figure 4-56 Removing the emergency door release button
Step 2 Install a new emergency door release button.
1.
2.
3.
4.
Figure 4-57 Installing the emergency door release button
Step 3 Check that the new emergency door release button is working properly.
----End
Issue 01 (2019-03-05)
Remove screws securing the emergency door release button, as shown by (1) in Figure
4-56.
Remove the glass panel of the emergency door release button, as shown by (2) and (3) in
Figure 4-56.
Remove screws securing the base, as shown by (4) in Figure 4-56.
Disconnect cables and remove the emergency door release button.
Connect cables.
Tighten screws on the base, as shown by (1) in Figure 4-57.
Install the glass panel, as shown by (2) and (3) in Figure 4-57.
Tighten screws, as shown by (4) in Figure 4-57.
Remove the cover of the emergency door release button using a screwdriver, press the button, and rotate
the door handle clockwise to open the container door. If the door can be opened, the emergency door
release button is working properly.
Copyright © Huawei Technologies Co., Ltd.
4 Parts Replacement
113