Raid Status; Hdd Status; Dcp Space Used - Sony LMT-300 User Manual

On the RAID pane, a consolidated status indicator for the
RAID is shown along with individual icons indicating the
status of each individual HDD.

RAID Status

RAID Status
A single indicator provides consolidated status
information for the RAID in the Media Block.

HDD Status

The icons of individual HDD indicate the status of the
specific Hard Disk Drive. HDD are numbered 1 to 7 which
corresponds to their location in the Media Block
subsystem. Six HDDs operate as a RAID device with a 7th
Drive acting as a spare.
The HDD Status/State information is shown in the
following table.
Appearance
Green - HDD is Installed and operating
normally.
Yellow - HDD is installed but is in a
Warning state.
Red - HDD is installed but is in an Error
condition.
Red/Green - HDD is installed and is in
the process of being rebuilt.
White/Gray - HDD is installed and is
designated as a Spare Drive.
Yellow/Gray - HDD is installed but is in
and unusable condition.
Outline - HDD is not installed in this
position. The Drive icon appears as a
simple outline.
HDD Status

DCP Space Used

HDD Status/State
DCP Space Used
A graphical representation of the percentage of the storage
space allocated to DCP Storage that is occupied.
42
Status