Huawei FusionModule500 User Manual page 53

FusionModule500 Smart Mini Data Center
User Manual (ECC800e)


Procedure
Step 1 Take out mounting ears from the battery pack fitting bag, and install the mounting ears on the
battery pack using eight M4 screws, as shown in
Figure 2-24 Installing mounting ears
Step 2 Install floating nuts at the battery pack installation position.
Step 3 Install heavy guide rails at the battery pack installation position, as shown in
Figure 2-25 Installing heavy guide rails
(1) Notch
Issue 07 (2019-12-20)
If only one battery pack is configured, install the battery pack in the 3 U space below the
UPS.
In the transportation scenario, the battery pack must be transported without boards.
Copyright © Huawei Technologies Co., Ltd.
Figure 2-24.
2 Installation
Figure 2-25.
44