Alarm Indication - Huawei UPS2000-G Series User Manual

UPS2000-G-(1 kVA-3 kVA)
User Manual
Alar Alarm Alarm
m ID Cause Name
ID
9E 1 On
bypass
9F 1 On
battery

4.8 Alarm Indication

Table 4-7 Alarm indication
Alarm
Insufficient battery capacity
Overload
Battery disconnection
Issue 15 (2019-12-19)
Alarm Alarm Clear
Severity Mode
Minor This alarm is
automatically
cleared.
Minor This alarm is
automatically
cleared.
Display (Blinking)
Copyright © Huawei Technologies Co., Ltd.
Trigger Impact on
Condition the
System
 The If the
inverter bypass is
is not abnormal,
started. the UPS
may power

The load
off.
power
exceeds
the rated
inverter
loading
capability
.

The
temperatu
re
exceeds
the rated
temperatu
re.
The mains When the
input is UPS works
abnormal. in battery
mode, the
UPS may
power off if
the batteries
are
abnormal.
Buzzer
Beeps once every second.
Beeps twice every second.
Beeps once every second.
4 Setting Control Panel
Repair Proposal
progress.
 Check whether
other alarms
are generated.
If other alarms
are generated,
clear them.
 If there are no
other alarms,
start the
inverter
manually.
Check the mains
input. If the mains
input is abnormal,
wait until the
mains input
recovers.
56