List Of New At-Commands; List Of Unsupported At-Commands; List Of At-Commands For V.25Ter Compatibility; Table 17: New Gprs At Commands - Siemens MC35 Migration Manual

Migration from MC35 to MC35i
P R E L I M I N A R Y
5.3

List of new AT-Commands

New commands - supported exclusively by MC35i.
GPRS AT commands
5.3.1

Table 17: New GPRS AT commands

# AT
144 AT+CGPADDR Show PDP address
147 AT+CGREG GPRS network registration status
Siemens defined AT commands for enhanced functions
5.3.2

Table 18: New Siemens defined AT commands

# AT
161 AT^SAIC Audio Interface Configuration
169 AT^SGACT Query all PDP context activation
173 AT^SLMS List Memory Storage
177 AT^SMONC Cell Monitoring
178 AT^SMONG GPRS Monitor
191 AT^SPBD Delete the given Phonebook
202 AT^SSMSS Set Short Message Storage Sequence
5.4

List of unsupported AT-Commands

MC35i supports the entire MC35 AT command set.
5.5

List of AT-Commands for V.25ter compatibility

These commands return "OK" but have no functionality in both MC35 and MC35i.

Table 19: V.25ter compatibility commands

# AT
1 ATL Set monitor speaker loudness
2 ATM Set monitor speaker mode
3 ATP Select pulse dialing
4 ATS1 READ-ONLY, INTERNAL USAGE
5 ATS2 Escape code sequence
6 ATS6 Set pause before blind dialing
7 ATS8 Set number of seconds to wait for comma dial modifier
8 ATS9 READ-ONLY, INTERNAL USAGE
9 ATS11-ATS17 READ-ONLY, INTERNAL USAGE
10 ATS19-ATS29 READ-ONLY, INTERNAL USAGE
11 ATT Select tone dialing
Migration from MC35 to MC35i
Command
Command
Command
28 of 30 12.03.03