Table 16: Siemens Defined At Commands - Siemens MC35 Migration Manual

Migration from MC35 to MC35i
P R E L I M I N A R Y
Siemens defined AT commands for enhanced functions
5.2.7

Table 16: Siemens defined AT commands

# AT
157 AT+CXXCID Display card ID (identical to AT^SCID)
158 AT^MONI Monitor idle mode and dedicated mode
Differing parameters, implementation and syntax wording
MC35
PLMN only
159 AT^MONP Monitor neighbour cell
Differing parameters
MC35
PLMN only
160 AT^SACM Advice of charge and query of ACM and ACMmax
161 AT^SBC Battery charge and charger control
Differing parameters
MC35
<bcs>
0 No charging adapter is connected
1 Charging adapter is connected
2 Charging adapter is connected, charging in
progress
3 Charging adapter is connected, charging has
finished
4 Charging error, charging is interrupted
5 False charging temperature, charging is
interrupted while temperature is beyond allowed
range
<bcl> Battery capacity
0, 20, 40, 60, 80, 100 percent of remaining capacity
(6 steps)
0 indicates that either the battery is exhausted or
the capacity value is not available
<mpc> Average power consumption:
Value (0...5000) of average power consumption
(mean value over a couple of seconds) in mA. See
read and write command for details.
162 AT^SCID Display SIM card identification number
163 AT^SCKS Set SIM connection presentation mode and query SIM connection status
164 AT^SCNI List Call Number Information
165 AT^SCTM Set critical operating temperature presentation mode or query temperature
Additional parameter and different syntax wording
MC35
<temp> not available.
166 AT^SDLD Delete the 'last number redial' memory
168 AT^SHOM Display Homezone
169 AT^SLCD Display Last Call Duration
170 AT^SLCK Facility lock
172 AT^SM20 Set M20 Compatibility
173 AT^SMGL List SMS messages from preferred storage
174 AT^SMGO Set or query SMS overflow presentation mode or query SMS overflow
177 AT^SMSO Switch off mobile station
178 AT^SMGR Read SMS message without set to REC READ
179 AT^SNFA Set or query microphone attenuation
180 AT^SNFD Set audio parameters to manufacturer default value
181 AT^SNFI Set microphone path parameters
Migration from MC35 to MC35i
Command
MC35i
PLMN is divided into MCC and MNC, differing
statuses
MC35i
PLMN is divided into MCC and MNC
MC35i
Feature not supported – not relevant to MC35i
<bcs> Connection status of charging adapter. Not
relevant for MC35I.
0 No charging adapter is connected.
<bcl> Battery capacity. Not relevant for MC35I.
0 Indicates that no battery is available.
<mpc> Average power consumption.
0 - 5000 ME's power consumption in mA
averaged over a couple of seconds.
MC35i
<temp> Current board temperature in Celsius. The value
is comprised between lowest and upper temperature limits.
26 of 30 12.03.03