Siemens SIMATIC HMI Series Operating Instructions Manual page 87

RCM AUSTRALIA/NEW ZEALAND
This product meets the requirements of EN 61000-6-4 Generic standards – Emission
standard for industrial environments.
This product meets the requirements of the standard EN 61000-6-4 Generic standards –
Emission standard for industrial environments.
KOREA
This product satisfies the requirement of the Korean Certification (KC Mark).
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기
바라며 가정 외의 지역에서 사용하는 것을 목적으로 합니다.
Note that this device conforms to Limit Class A for emission of radio interference. This
device can be used in all areas except the residential area.
Identification for Eurasion Customs Union
● EAC (Eurasian Conformity)
● Customs union of Russia, Belarus and Kazakhstan
● Declaration of conformity according to Technical Regulations of the Customs Union
(TR CU)
WEEE label (European Union)
Disposal instructions, observe the local regulations and the section
"Recycling and disposal (Page 82)".
Marine approvals
The following acceptance tests for marine and offshore applications are planned for the
device:
● ABS American Bureau of Shipping (USA)
● BV Bureau Vertias (France)
● DNV-GL Det Norske Veritas (Norway)-Germanischer Lloyd
● LR Lloyds Register
● CCS (China Classification Society)
● NK Nippon Kaiji Kyokai (Japan)
● KR (Korean Register of Shipping)
After acceptance has been granted, you can find the corresponding certificates on the
Internet at the following addresses:
● IFP certificates (https://support.industry.siemens.com/cs/ww/en/ps/16788/cert)
● IFP PRO certificates (https://support.industry.siemens.com/cs/ww/en/ps/21662/cert)
IFP V2, IFP V2 PRO
Operating Instructions, 08/2019, A5E46641410-AA
Technical information
7.1 Certificates and approvals
87