Siemens SIMATIC HMI Series Operating Instructions Manual page 84

Technical information
7.1 Certificates and approvals
You can download information on the EC Declaration of Conformity, here under the keyword
"Declaration of Conformity":
● IFP certificates (https://support.industry.siemens.com/cs/ww/en/ps/16788/cert)
● IFP PRO certificates (https://support.industry.siemens.com/cs/ww/en/ps/21662/cert)
UL approval
See the following notes:
● The device shall be supplied from an isolating source.
● Only for use in LAN, not for connection to telecommunication circuits.
Underwriters Laboratories Inc., to
● UL 61010-2-201 (E116536)
● CSA C22.2 No. 61010-2-201
or
Underwriters Laboratories Inc., to
● UL 61010-2-201 (E222109)
● CSA C22.2 No. 61010-2-201
● ANSI/ISA 12.12.01 (Hazardous Location)
● CSA C22.2 No. 213 (Hazardous Location)
Approved for use in
● Class I, Division 2, Group A, B, C, D T4 or
● Class I, Zone 2, Group IIC T4 or
● non-hazardous locations
FM Approval
Factory Mutual Research (FM) conforming to
● Approval Standard Class Number 3611, 3600, 3810, ANSI/ISA 61010-1
● CSA C22.2 No. 213
● CSA C22.2 No. 61010-1
Approved for use in
● Class I, Division 2, Group A, B, C, D T4
● Class I, Zone 2, Group IIC T4
Installation Instructions for cFMus:
WARNING – Do not remove or replace while circuit is live when a flammable or combustible
atmosphere is present.
WARNING – Substitution of components may impair suitability of the equipment.
84
Operating Instructions, 08/2019, A5E46641410-AA
IFP V2, IFP V2 PRO