Setting The Ip Address And Domain - Siemens SINUMERIK 840DE sl Commissioning Manual

Configuration of the system

4.4 Setting the IP address and domain

4.4 Setting the IP address and domain
The network settings in the delivery condition have been adapted for use with SINUMERIK
solution line and usually do not have to be changed.
See also: Network settings (Page 10)
If you want to distinguish your network configuration from the factory settings, you can adapt
them in the Windows Control Panel.
You will find these settings in the following menu:
● "Start > Control Panel > Network and Sharing Center > View network connections"
Further information
You can adapt the network settings for backing up and restoring disk images in the
configuration of the Service Center (Page 63).
You will find information about network settings under Windows 7 in the Windows help.
● To call up the Windows help, click "Help and Support" in the Start menu.
● You will find help for Windows 7 in the Internet on the Microsoft website: Microsoft Windows
support
help#windows=windows-7)
32
(http://windows.microsoft.com/en-US/windows/windows-
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
PCU Base Software (IM10)