Connectable Drive-Cliq Components - Siemens NCU 7 0.2 Series Manual

Connecting
7.5 DRIVE CLiQ components
7.5.2

Connectable DRIVE-CLiQ components

Components
As a rule, all SINAMICS components approved for SINUMERIK can be connected using the
DRIVE-CLiQ interface.
Table 7- 8
Component
NX10/15
SINAMICS S120, system components of the booksize and chassis formats
Smart / Active / Basic
Line Module
Single / Double Motor
Module
SINAMICS S120, additional system components
SMC10/20/30
SME20/25
DMC20/DME20
TM15
Additional references
● For information on SINAMICS S120 line modules and Motor Modules, please refer to the
● You can find information on all other modules in the SINAMICS S120 "Control Units and
54
Components with DRIVE-CLiQ
– Equipment Manual Booksize Power Units
– Chassis Power Units Equipment Manual
Additional System Components" Manual.
Description
Drive expansion module for up to 6 axes
Line Modules provide the central power supply to the DC link.
Motor Modules draw their power from the DC link to supply the
connected motors.
Cabinet-Mounted Sensor Modules are needed when a motor with a
DRIVE-CLiQ interface is not available and when external encoders
are required in addition to the motor encoder.
Measuring systems outside the cabinet can be connected directly to
the Sensor Module External.
DRIVE-CLiQ Hub Modules are used to implement star-shaped
distribution of a DRIVE-CLiQ line.
The number of available digital inputs and outputs within a drive
system can be expanded with the Terminal Module.
Manual, 02/2011, 6FC5397-0AP20-0BA0
NCU 7x0.2