3.4.5
Start-up and mode selector switch
Layout
The Control Unit has two coding switches in the lower section of the front panel.
● The left switch (labeled SIM/NCK) is the NCK startup switch.
● The right switch (labeled PLC) is the PLC mode selector switch.
Additional references
CNC Commissioning Manual Part 1 (NCK, PLC, drive)
NCU 7x0.2
Manual, 02/2011, 6FC5397-0AP20-0BA0
Setting during normal operation: "0"
Setting during normal operation: "0"
Figure 3-5
Startup and mode selector switch
3.4 Operating and display elements
Description
27