Siemens SINAMICS G130 Operating Instructions Manual page 148

Commissioning
5.3 Procedure for commissioning via STARTER
Note
Entering equivalent circuit diagram data
You should only activate the Enter optional equivalent circuit diagram data if the data sheet
with equivalent circuit diagram data is available. If any data is missing, an error message will
be output when the system attempts to load the drive project to the target system.
⇒ Click Continue >
Configuring the motor – Entering optional data
Figure 5-21
⇒ enter the optional motor data.
⇒ Click Continue >
148
Entering optional motor data
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A