Preparation - HP ProCurve 5300xl Series Management Manual

Static Virtual LANs (VLANs)
Special VLAN Types
Links with Ports
Configured as Members of
the Management VLAN
and other VLANs
Links Not Belonging to the
Management VLAN
System
Management
Workstation
Figure 2-28. Example of Management VLAN Control in a LAN
Switch
Management VLAN (VID = 7)
Marketing VLAN (VID = 12)
Shipping Dept. VLAN (VID = 20)
DEFAULT-VLAN (VID = 1)
2-46
Switch
A
Port A1
Port A3
Port A6
Port A7
1
Shipping
2
Table 2-7. VLAN Membership in Figure 2-28
A1 A3 A6
Y N N
N N N
N Y Y
Y Y Y

Preparation

1. Determine a VID and VLAN name suitable for your Management VLAN.
(You must manually configure the IP addressing for the Management
VLAN. The switch does not allow the Management VLAN to acquire an IP
address through DHCP/Bootp.)
2. Plan your Management VLAN topology to use HP ProCurve switches that
support this feature. (Refer to page 2-44.) The ports belonging to the
Management VLAN should be only the following:
• Ports to which you will connect authorized management stations
(such as Port A7 in figure 2-28.)
• Ports on one switch that you will use to extend the Management VLAN
to ports on other HP ProCurve switches (such as ports A1 and B2 or
B4 and C2 in figure 2-28 on page 2-46.).
Switch
Switch
B
Port B2
Port C2
Port B4
Port C3
Port B5
Port C6
Port B9
Port C8
Server
System Server
Server
(on the
DEFAULT_VLAN)
A7 B2 B4 B5
Y Y Y N
N N N N
N N N N
Y Y Y Y
3
C
4
Server
Marketing
B9 C2 C3 C6
N Y N N
N N Y Y
N N N N
Y Y Y Y
C8
N
Y
N
Y