PIM-DM (Dense Mode) on the 5300xl Switches
Displaying PIM Data and Configuration Settings on the Series 5300xl Switches
5-32
DownStream Interfaces:
– VLAN: Lists the VID of the destination VLAN on the next-
hop multicast router.
Prune Reason: Identifies the reason for pruning the flow to the
–
indicated VLAN:
•
•
•
Figure 5-14. Example From the "5304XL #1" Routing Switch in Figure 5-4 on Page
5-20 Showing a Multicast Group from a Directly Connected Source
Prune: A neighbor multicast router has sent a prune
request.
Assert: Another multicast router connected to the
same VLAN has been elected to provide the path for
the specified multicast group traffic.
Other: Used where the VLAN is in the pruned state
for any reason other than the above two reasons
(such as no neighbors exist and no directly con
nected hosts have done joins).
This example displays the MRT
data on the first of the two
multicast groups shown in figure
5-13 on page 5-31.