Quality of Service (QoS): Managing Bandwidth More Effectively
Using QoS Classifiers To Configure Quality of Service for Outbound Traffic
8-58
Syntax: no interface < port-list > qos
Disables use of the specified source-port(s) for QoS classi
fier(s) and resets the priority for the specified source-port(s)
to
No-override
Syntax: show qos port-priority
Lists the QoS port-priority classifiers with their priority
data.
For example, suppose that you want to prioritize inbound traffic on the
following source-ports:
Source-Port Priority
A1 - A3
2
A4
3
B1, B4
5
C1-C3
6
You would then execute the following commands to prioritize traffic received
on the above ports:
Figure 8-31. Configuring and Displaying Source-Port QoS Priorities
.