Table of Contents
Advertisement
DOK-SUPPL*-VEH*30.2***-PR03-EN-P
Rexroth IndraControl VEH 30.2 Hand-Held Terminal
Hand-held
Putting down on a horizontal sur‐
Hanging in holder
Because of its symmetric design the IndraControl VEH 30.2 can be comforta‐
bly used by right and left handers. If the working intervals are longer the hold‐
ing arm can be changed.
Due to the safety requirements the enabling has to be interrupted
while changing the hand.
Fig.6-3:
Handling of the IndraControl VEH 30.2
The ergonomic housing shape and the molded handles support several types
of use:
You can support the IndraControl VEH 30.2 against your body lying on the
forearm, as described above.
Enable (Release)
Operation
Tab.6-1:
Hand-held operation and enabling
If
the
operator
face
IndraControl VEH 30.2 can be also put down on horizontal surfaces. The
combined holding and depositing handle enables to put down the device
easily or to work for a longer time in a sitting position. The incline of the front
panel facilitates the reading of the LC display.
The IndraControl VEH 30.2 can be also mounted space-savingly at a vertical
surface. For this, a wall holder is provided as accessories. Mounting the wall
holder is shown in
Display and Operating Components
Occurs by the fingers of the holding hand
Occurs with the free hand
does
not
have
to
chapter 5 "Dimensions" on page
Bosch Rexroth AG
59/109
activate
the
enabling,
51.
the
Advertisement
Table of Contents
