Expanding the Operator Interface (BE1)
3 Syntax
Other system variables
• Ascending numbers can be entered in the first column.
Example:
• Consecutive texts from the language files can be entered in the first column.
Example:
Focus control in the grid
The Row and Col properties can be used to set and calculate the focus within a
table.
Syntax Row and Col properties:
Identifier.Row
Identifier.Col
Line properties:
Each cell in a table has the Val and Vld properties.
In order to read and write cell properties, a line and column index must be specified
in addition to the variable identifiers from the definition list.
Syntax Val properties:
Identifier[line index, column index].Val or identifier [line index, column index]
Syntax Vld properties:
Identifier[line index, column index]. Vld
Example:
Var1[2,3].val=1.203
If a line or column index is not specified, the indices of the focused cell apply.
Example:
Var1[2,3].val=1.203
Is equivalent to:
Var1.Row =2
Var1.Col=3
Var1.val=1.203
BE1/3-62
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
(I///,"Lines"///"0"/60/1)
(S///,"Lines"///"$80000"/60/1)
© Siemens AG, 2005. All rights reserved
08/2005