Siemens SINUMERIK 840D sl Commissioning Manual page 354

Starting Up HMI Embedded (IM2)
5 Creating In-House Alarm Texts
The user icons have to meet the following requirements:
• Colors:
• Size:
• File name:
• Format:
Configuring
The cross-channel status display is allocated and configured with user icons in the
HEADER.INI file.
HEADER.INI is located on the CompactFlash card in directory
siemens/sinumerik/hmi/cfg/
Copy the HEADER.INI file to directory oem\sinumerik\hmi\cfg.
Use the editor to open the file and assign the user icons to the desired positions.
Enter the names of the user icons and the signal for controlling symbol selection in
the HEADER.INI file, section "UserIcons".
[UserIcons]
UI_0= <Ikone_00.bmp>, <position>
...
UI_31= <Ikone_31.bmp>, <position>
USER_ICON_BASE = DBx.DBBy
User icons are addressed bit-by-bit, i.e., if bit n is set in signal DBx.DBBy, the user
icon with identifier UI_n is displayed.
If the bit is reset by the PLC, the assigned user icon in the program status display
is deleted.
If several user icons are assigned to the same position, the user icon with the
highest identifier number is displayed. Empty positions do not have to be entered.
IM2/5-104
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
16-color mode
OP010/OP010C/OP010S: 16 x 16 pixel (height x width)
OP012: 20 x 20 pixel
OP015: 27 x 26 pixel
8 characters
BMP
UI_0:
Ikone_00.bmp:
Position:
DBx.DBBy:
Identifier
Name of user icon
Display position (1 to 16)
Signal for controlling icon selection, defined by
the user.
© Siemens AG, 2005. All rights reserved
08/2005