Siemens SINUMERIK 828D Function Manual page 77

Measure Documentation
Changing the mon‐ Inclusion of config‐
itoring clock cycle uration data
of the drive
Changes to the Inclusion of config‐
TM54F monitoring uration data
clock cycle
Changes to the Adapt configura‐
drive assignment tion diagram
SW upgrade up‐ Inclusion of soft‐
date 2 (NCU/drive/ ware version
PLC)
SW update up‐ Inclusion of soft‐
grade 3 (NCU/ ware version
drive/ PLC)
Change to an indi‐ Inclusion of SI
vidual limit value function per axis
(e.g. SG limit)
Expanded function Inclusion of the SI
(e.g. additional ac‐ function per axis,
tuator, additional function table
SG stage)
Data transferred to Possible supple‐
additional ma‐ ment to the ma‐
chines with series chine description
commissioning (check the soft‐
ware version)
Note
Test with reduced test scope
Test of Safety Integrated Functions at any axis (each PPU and each NX) and a comparison
with the test results before the upgrade.
Note
If the results of function test, Part 2 are taken from another identical machine, then this is the
sole responsibility of the machine manufacturer and must be appropriately commented in the
acceptance report.
SINUMERIK Operate acceptance test
Function Manual, 08/2018, A5E39460574B AC
Actions for hardware replacement and modifications
5.2 Effect of the acceptance test for specific measures
Function test Function test
Part 1 Part 2
No Yes
Yes No
Yes, only Point 2.6 No
(Page 85)
No 1 No 1
No 1 Yes, for axes with
modified drive
checksum 1.4
No Yes, only test the
corresponding
function
Yes, only for the Yes, only for the
tests influenced by tests influenced by
the function expan‐ the function expan‐
sion sion
Yes No
Supplementary Completion of the
measures report
No Inclusion of the
new checksum
and countersigna‐
ture
No Inclusion of the
new checksum
and countersigna‐
ture
Point 4.1 (Page 85) Inclusion of the
new checksum
and countersigna‐
ture
Point 4.3 (Page 85) Inclusion of
possibly new
checksums and
countersignature
Points 4.3 and 4.4 Inclusion of
(Page 85)
possibly new
checksums and
countersignature
No Inclusion of the
new checksum
and countersigna‐
ture
No Inclusion of the
new checksum
and countersigna‐
ture
Points 4.1, 4.3 and Inclusion of the
4.5 (Page 85) new checksum
and countersigna‐
ture
77