Documentation, Data Archiving And Authorized Persons - Siemens SINUMERIK 828D Function Manual

2.3

Documentation, data archiving and authorized persons

The results of the acceptance test as well as all hardware and software changes must be
documented in a suitable form (as an acceptance report). Within the scope of the acceptance
report, the alarm displays must be checked or the alarm reports must be incorporated into the
acceptance report.
In addition to the acceptance report, the following safety-related data must be archived:
● NC machine data
● Drive parameters
● Complete safety printout (not for SINUMERIK 840D sl with Safety Integrated (system-
integrated))
● PLC project
Access rights to SI parameters must be protected by a password. This procedure must be
documented in the acceptance report – the password itself must not appear there.
The acceptance report and all of the associated safety-related data must be kept together with
the machine logbook.
Authorized persons
Personnel from the machine manufacturer, who, on account of their technical qualifications
and knowledge of the safety functions, are in a position to perform the acceptance test in the
correct manner, are authorized to carry out an acceptance.
The test of each safety function must be carried out by an authorized person. The person that
carries out the acceptance test must also sign the acceptance report.
SINUMERIK Operate acceptance test
Function Manual, 08/2018, A5E39460574B AC
2.3 Documentation, data archiving and authorized persons
Introduction
17