GE Amersham Typhoon Operating Instructions Manual page 62

4 Amersham Typhoon Control Software
4.1 Main window
4
Only for digitization
Stage/Area settings
In the Stage/Area pane, the area that is to be scanned is defined.
Part
1
2
For more information about the Stage/Area settings, refer to
functions, on page
62
Name
Stage/Area
Scanning surface
72.
1
2
Function
Selects the stage and area that will be used
for scanning.
Displays the total scanning surface of the
scanner:
White area indicates an area that will not
•
be scanned.
Blue area indicates a scan area that will
•
be scanned.
Blue frame (white area) indicates a scan
•
area that has been disabled. A disabled
scan area will be omitted during scan-
ning.
Section 4.4 Scan area
Amersham Typhoon Operating Instructions 29193226 AC