GE Amersham Typhoon Operating Instructions Manual page 120

6 Operation
6.3 Performing a scan
Step
6
7
Stop a scan
To stop a scan, click Stop.
Result: The scan is aborted. The image will be saved, and the unscanned area will be
saved with a data value of 0. The scan cannot be re-started from the position where the
scanning was stopped.
Save the image under a different
name
The scanned images are automatically saved under the name and directory that are
selected in the Image file settings pane in the main window.
Images can be rotated and flipped using buttons on the View Image window. To save
a copy of the image or images under a different name, follow the steps below:
Step
1
2
3
120
Action
Click Scan.
Result: The sample is scanned, and the image is displayed in the View Image
window.
When the scan is completed, the image file(s) are automatically saved in the
location selected in the Image folder field.
For viewing, it is possible to adjust the display parameters if desired, see
Section 4.6 View Image mode, on page
Tip:
To copy the displayed image, point to the image and right-click. A copy of the
image can be pasted in other programs for presentation purposes.
Action
If necessary, flip or rotate the image using the flip and rotate buttons in the
View Image window.
After the scan is completed, click Save as....
Type a file name in the File name: field.
Note:
For the DIGE method it is not possible to choose a new file name and the
sample annotations are not included in the Save as option. If necessary,
choose a new save location to keep the original DIGE data.
78.
Amersham Typhoon Operating Instructions 29193226 AC