ABB ACS355 Series Quick Start Up Manual page 124

3. Write FB500 in the block field to create an instance of FB500.
Figure 149 Instance of FB500
4. Create a unique Data block for the control of the drive by enabling Manual option and by
selecting the Number.
Figure 150 FB500 DB1
Drive status, inputs and outputs of the function block are stored in this Data block. Since it is a
new Data block, you have to generate it by clicking OK in the pop-up window.
Note: If you add more drives to the program, make sure to create new unique Data blocks.
5. Connect the block inputs and outputs to variables according to your application.
Note: Select a block input or output and see more information in the Info.