Introduction
1.1
Purpose of this documentation
These instructions contain all the information you need for commissioning and using the
device.
It is aimed both at persons mechanically installing the device, connecting it electronically,
configuring the parameters and commissioning it as well as service and maintenance
engineers.
1.2
History
This history establishes the correlation between the current documentation and the valid
firmware of the device.
The documentation of this edition is applicable for the following firmware:
Edition
01
10/2007
The most important changes in the documentation when compared with the respective
previous edition are given in the following table.
Edition
01
10/2007
1.3
Further information
Information
The contents of these instructions shall not become part of or modify any prior or existing
agreement, commitment or legal relationship. All obligations on the part of Siemens AG are
contained in the respective sales contract which also contains the complete and solely
applicable warranty conditions. Any statements contained herein do not create new
warranties or modify the existing warranty.
SITRANS DA400 for oscillating positive displacement pumps with protection against explosion
Operating Instructions, 10/2007, A5E00841127-01
Firmware ID
FW: V2.01.00
Remark
First edition
System integration
PDM V6.0
DD Rev. 30.301.1
1
Installation path for PDM
SITRANS DA400
7