Canon K1 Service Manual page 86

3)Turn the nut [1] on the front caster assembly (connected equipment side) clockwise to loosen
it.Then turn the nut [2] to adjust the height.
MEMO:
・Turn the nut [2] counterclockwise to lower and clockwise to heighten.
Inclination Adjustment
1) Turn the nut [1] on the front caster assembly (paper ejection side) clockwise to
loosen it.Then turn the nut [2] to adjust the height.
MEMO:
・Turn the nut [2] counterclockwise to lower and clockwise to heighten.
6
Installation > Installation Procedure > Height/Inclination Checks
[1]
[2]
F-6-19 F-6-19
[1]
[2]
6
Installation > Installation Procedure > Height/Inclination Checks
4)Turn the nut [1] on the rear caster assembly (connected equipment side) clockwise to loosen it.Then
turn the nut [2] to adjust the height.
MEMO:・Turn the nut [2] counterclockwise to lower and clockwise to heighten.
・After making the adjustment,tighten the front and rear nuts[1] on the inserter.
2) With the nut [1] on the rear caster assembly (paper ejection side) being loosened, turn the
nut [2] to adjust the height. When the adjustment is complete, tighten the nut [1].
F-6-21 F-6-21
MEMO:・Turn the nut [2] counterclockwise to lower and clockwise to heighten.
・After making the adjustment,tighten the front and rear nuts[1] on the inserter.
6-12
[1]
[2]
F-6-20 F-6-20
[1]
[2]
F-6-22 F-6-22
6-12