Loading Software via BBI
1. Click the Configure context tab in the toolbar.
2. In the Navigation Window, select System > Config/Image Control.
3. If you are loading software from your computer (HTTP client), skip this step and
4. In the Image Settings section, select the image version you want to replace (Image
84
G8264 Application Guide for ENOS 8.4
You can use the Browser‐Based Interface to load software onto the G8264. The
software image to load can reside in one of the following locations:
FTP server
TFTP server
SFTP server
Local computer
After you log onto the BBI, perform the following steps to load a software image:
The Switch Image and Configuration Management page appears.
go to the next. Otherwise, if you are loading software from an FTP, SFTP, or TFTP
server, enter the server's information in the FTP, SFTP, or TFTP Settings section.
for Transfer).
If you are loading software from an FTP, SFTP, or TFTP server, enter the file
name and click Get Image.
If you are loading software from your computer, click Browse.
In the File Upload Dialog, select the file and click OK. Then click Download via
Browser.
Once the image has loaded, the page refreshes to show the new software.