Dynamic Mrouters - Lenovo RackSwitch G8264 Application Manual

Dynamic Mrouters

© Copyright Lenovo 2016
The switch learns Mrouters on the ingress VLANs of the MLD‐enabled interface.
All report or done messages are forwarded to these Mrouters. By default, the
option of dynamically learning Mrouters is disabled. To enable it, use the following
command:
RS G8264(config)# interface ip <interface number>
RS G8264(config­ip­if)# ipv6 mld dmrtr enable
Chapter 33: Multicast Listener Discovery
527