Kenwood TKR-750 Programming Reference Manual page 68

Table 7-2 Functions that you can adjust in PC Tuning Mode
Wide/
Function
Narrow
You can adjust the VCO frequency during reception.
Reception
- TKR-750/751 (VHF): Single Reference Level Adjustment
Frequency
TKR-850/851 (UHF): Single Reference Level Adjustment
Reception You can adjust the VCO frequency during reception.
Frequency - TKR-750/751 (VHF) only: Single Reference Level Adjustment
(Low) You can make the adjustment in steps of 2.5 kHz.
Reception You can adjust the VCO frequency during reception.
Frequency - TKR-750/751 (VHF) only: Single Reference Level Adjustment
(High) You can make the adjustment in steps of 2.5 kHz.
You can adjust the VCO frequency during transmission.
Transmission
- TKR-750/751 (VHF): Single Reference Level Adjustment
Frequency
TKR-850/851 (UHF): Single Reference Level Adjustment
Transmission You can adjust the VCO frequency during transmission.
Frequency - TKR-750/751 (VHF) only: Single Reference Level Adjustment
(Low) You can make the adjustment in steps of 2.5 kHz.
Transmission You can adjust the VCO frequency during transmission.
Frequency - TKR-750/751 (VHF) only: Single Reference Level Adjustment
(High) You can make the adjustment in steps of 2.5 kHz.
Wide
You can adjust the Squelch Level 15.
Squelch Tight
Single Reference Level Adjustment
Narrow
Wide You can adjust the Squelch Level 1.
Squelch
Single Reference Level Adjustment
Open
Narrow
The TKR-750/850/751/851 stores the RSSI Level at the same time.
RD (RX Wide
Detector You can adjust the RD (RX Detector Signal Output) level.
Output) Single Reference Level Adjustment
Narrow
Level
RA (RX Audio Wide
You can adjust the RA (RX Audio Signal Output) level.
Output)
Single Reference Level Adjustment
Narrow
Level
TX High You can adjust the TX High Power level.
-
Power High Power: 3 Reference Level Adjustments
TX Low You can adjust the TX Low Power level.
-
Power Low Power: 3 Reference Level Adjustments
You can configure the threshold level to detect the degradation of the output power while
Power Down
- transmitting in High Power mode.
Detect (High)
Single Reference Level Adjustment
You can configure the threshold value to detect the degradation of the output power while
Power Down
- transmitting in Low Power mode.
Detect (Low)
Single Reference Level Adjustment
Wide You can adjust the Maximum Deviation level.
Max
TKR-750/751 (VHF): 6 Reference Level Adjustments (3 Reference levels for VCO A and B)
Deviation
Narrow
TKR-850/851 (UHF): 3 Reference Level Adjustments
Wide You can adjust the DQT Encode balance.
DQT Balance TKR-750/751 (VHF): 2 Reference Level Adjustments
Narrow
TKR-850/851 (UHF): Single Reference Level Adjustment
TD (Ext. Wide You can adjust the TD (external signalling) level.
Signalling) TKR-750/751 (VHF): 2 Reference Level Adjustments
Narrow
Deviation TKR850/-851 (UHF): Single Reference Level Adjustment
TA (TX Wide You can adjust the TA (TX Audio) level.
Audio) TKR-750/751 (VHF): 2 Reference Level Adjustments
Narrow
Deviation TKR-850/851 (UHF): Single Reference Level Adjustment
Version: 1.01
Description
Field Programming Reference (FPRG)
7 PROGRAM MENU
Signalling
Sig CH = 2
63