Kenwood TKR-750 Programming Reference Manual page 40

6 EDIT MENU
Function Name
The TKR-750/850/751/851 enables the Repeat Hold Time.
Hold Time Enable You can configure this function only when at least one channel is configured as the Repeat for Operation mode and
the Repeat Hold Time is enabled.
Local TX Disable The TKR-750/850/751/851 restricts the transmissions using the Local Mic PTT.
Local TX Enable The TKR-750/850/751/851 enables the transmissions using the Local Mic PTT.
The TKR-750/850/751/851 switches the transmission power from Low to High.
Low Power
This function is enabled only when at least one channel is configured as High for TX Power.
Off*1
High Power.)
The TKR-750/850/751/851 switches the transmission power from High to Low.
Low Power
This function activates only when at least one channel is configured as High for TX Power.
On *1
Power.)
The TKR-750/850/751/851 enables the signalling Decode function.
Monitor Off
This function does not operate when the TKR-750/850/751/851 enables the repeat operation.
Monitor On The TKR-750/850/751/851 disables the signalling Decode function.
Multi-table Sub The signalling specified in the Multi-table Select is switched to the Sub-table.
Multi-table Main The signalling specified in the Multi-table Select is switched to the Main-table.
QT/DQT Decode The TKR-750/850/751/851 disables QT/DQT Decode function.
Disable This function is available even when it is performing the repeat operation.
QT/DQT Decode
The TKR-750/850/751/851 enables the QT/DQT Decode function.
Enable
QT/DQT Encode
The TKR-750/850/751/851 disables the QT/DQT Encode function.
Disable
QT/DQT Encode
The TKR-750/850/751/851 enables the QT/DQT Encode function.
Enable
The TKR-750/850/751/851 disables the repeat operation.
Repeat Disable
You cannot configure this function if no channel is configured to the repeat operation.
The TKR-750/850/751/851 enables the repeat operation.
Repeat Enable
You cannot configure this function if no channel is configured to the repeat operation.
Scan Off The TKR-750/850/751/851 disables the scan function.
Scan On The TKR-750/850/751/851 enables the scan function.
The TKR-750/850/751/851 disables Scrambler.
Scrambler Off
You cannot configure this function when the optional Scrambler board is not installed.
The TKR-750/850/751/851 enables Scrambler.
Scrambler On
You cannot configure this function when the optional Scrambler board is not installed.
Squelch Off The TKR-750/850/751/851 disables Squelch.
Squelch On The TKR-750/850/751/851 enables Squelch.
Test Tone Off The TKR-750/850/751/851 switches Test Tone Off.
Test Tone On The TKR-750/850/751/851 switches Test Tone On.
TOT Disable*2 The TKR-750/850/751/851 disables Time-out Timer function.
TOT Enable*2 The TKR-750/850/751/851 enables Time-out Timer function.
TX Disable The TKR-750/850/751/851 restricts all transmissions.
TX Enable The TKR-750/850/751/851 permits all transmissions.
*1: You cannot switch to Low Power while transmitting or scanning.
The Low Power status is retained even if the channel is changed or the
*2: This function can be used for the TOT of the Local Mic PTT and the Repeater/External PTT.
35
Description
(Refer to 6.4.1 Optional Features 1 Tab.)
TKR-750/850/751/851
Field Programming Reference (FPRG)
(Refer to 6.2.11 TX
(Refer to 6.2.11 TX High
(Refer to 6.10.1 AUX Select Tab.)
(Refer to 6.10.1 AUX Select Tab.)
is turned ON/OFF.
Version: 1.01