Suzuki SWIFT Owner's Manual page 89

Hide thumbs Also See for SWIFT:
Table of Contents

Advertisement

NOTE:
• If you refuel when the ignition mode is
ON, the driving range may not indicate
the correct value.
• When you reconnect the negative (–)
terminal to the lead-acid battery, the
value of driving range will be shown after
driving for a period of time.
Average speed
If you selected average speed the last time
you drove the vehicle, the display indicates
the last value of average speed from previ-
ous driving when the engine switch is
pressed to change the ignition mode to
ON. Unless you reset the value of average
speed, the display indicates the value of
average speed which includes average
speed during previous driving.
To reset the value of average speed, push
and hold the indicator selector knob (3) for
a while when the display indicates an aver-
age speed. The display shows "---" and
then indicates a new average speed after
driving for a short time.
NOTE:
When you reconnect the negative (–) ter-
minal to the lead-acid battery, the value of
average speed will be shown after driving
for a period of time.
Driving time
The display shows the total amount of driv-
ing time since the indication was reset.
• To reset the driving time, push and hold
the indicator selector knob (3) for a while
when the display shows the driving time.
NOTE:
• When you reset the indication or recon-
nect the negative (–) terminal to the
lead-acid battery, the driving time will be
shown after driving for a while.
• The indicated maximum value of driving
time is 99:59:59. No more than the maxi-
mum value will be indicated on the dis-
play until you reset the driving time.
Total idling stop time
The display shows the total length (in
hours, minutes and seconds) of engine
stopping time by ENG A-STOP system
since the indication was reset.
• To reset the total idling stop time, push
and hold the indicator selector knob (3)
for a while when the display shows the
total idling stop time.
NOTE:
• The indicated maximum value of the
total idling stop time is 99:59:59.
• When you reconnect the negative (–)
terminal to the lead-acid battery, the
value of the total idling stop time will be
reset.
BEFORE DRIVING
Total idling fuel saved
The display shows the total amount (in mil-
liliters) of fuel conservation by ENG A-
STOP system since the indication was
reset.
• To reset the total idling fuel saved, push
and hold the indicator selector knob (3)
for a while when the display shows the
total idling fuel saved.
NOTE:
When you reconnect the negative (–) ter-
minal to the lead-acid battery, the value of
the total idling fuel saved will be reset.
Selector position
The display (D) shows the transaxle selec-
tor position (4).
EXAMPLE
(4)
(4) Selector position
57RK0-14E
57RK034
2-68

Advertisement

Table of Contents
loading

Table of Contents