(3)
(4)
52RS70030
2) Remove the wire (3) from a clamp (4).
3) To remove the bulb holder of the rear
turn signal light (5) or the reversing light
(6) from the light housing, turn the
holder counterclockwise and pull it out.
EXAMPLE
(5) / (6)
(7)
(8)
52RS70050
(7) Removal
(8) Installation
4) To remove and install the bulb of the
rear turn signal light (5) or the reversing
light (6), simply pull out or push in the
bulb.
INSPECTION AND MAINTENANCE
52RM70190
NOTE:
When reinstalling the light housing, check
that the clips are properly attached.
57RK0-14E
7-38