Suzuki SWIFT Owner's Manual page 105

Hide thumbs Also See for SWIFT:
Table of Contents

Advertisement

AIR BAG light
When the ignition switch is turned to "ON"
position or the engine switch is pressed to
change the ignition mode to ON, this light
blinks or comes on for several seconds so
you can check that the light is working.
The light will come on and stay on if there
is a problem in the air bag system or the
seat belt pretensioner system.
WARNING
If AIR BAG light does not blink or
come on briefly when the ignition
switch is turned to "ON" position or
the engine switch is pressed to
change the ignition mode to ON,
stays on for more than 10 seconds,
or comes on while driving, the air bag
system or the seat belt pretensioner
system may not work properly, which
could result in serious injury in the
event of a crash. Have both systems
inspected by an authorized SUZUKI
dealer.
Malfunction indicator light
63J030
Your vehicle has a computer-controlled
emission control system. A malfunction
indicator light is provided on the instrument
cluster to indicate when it is necessary to
have the emission control system serviced.
When the ignition switch is turned to "ON"
position or the engine switch is pressed to
change the ignition mode to ON, this light
comes on. When the engine is started, the
light goes out.
If the malfunction indicator light comes on
or blinks when the engine is running, there
is a damage in the emission control sys-
tem.
Bring the vehicle to an authorized SUZUKI
dealer to have the damage fixed.
Also, if this light comes on when the
engine is running, there is a problem with
the continuously variable transaxle sys-
tem. Ask an authorized SUZUKI dealer to
have the system inspected.
BEFORE DRIVING
NOTICE
Continuing to drive the vehicle when
the malfunction indicator light is on
or blinking can cause permanent
damage to the vehicle's emission
control system, and can affect fuel
economy and driveability.
65D530
Transaxle warning light
(if equipped)
When the ignition switch is turned to "ON"
position or the engine switch is pressed to
change the ignition mode to ON, this light
comes on for several seconds so you can
check that the light is working.
If this light comes on when the engine is
running, there is a problem with the contin-
uously variable transaxle system. Ask an
authorized SUZUKI dealer to have the sys-
tem inspected.
80J219
2-84
57RK0-14E

Advertisement

Table of Contents
loading

Table of Contents