Drive Control With The Panel; How To Start, Stop And Change Direction - ABB ACS800 Series Firmware Manual

Drive control with the panel

The user can control the drive with the panel as follows:
• start, stop, and change direction of the motor
• give the motor speed reference or torque reference
• reset the fault and warning messages
• change between local and external drive control.
The panel can be used for drive control when the drive is under local control and the
status row is visible on the display.

How to start, stop and change direction

Step
1.
2.
3.
4.
5.
6.
Action
To display the status row.
To switch to local control.
(only if the drive is not under local
control, i.e. there is no L on the first row
of the display.)
To stop
To start
To change the direction to reverse.
To change the direction to forward.
Press Key Display
1 ->1242.0 rpm
ACT PAR
FREQ
CURRENT
FUNC
POWER
1 L ->1242.0 rpm
LOC
FREQ
REM
CURRENT
POWER
1 L ->1242.0 rpm
FREQ
CURRENT
POWER
1 L ->1242.0 rpm
FREQ
CURRENT
POWER
1 L <-1242.0 rpm
0
FREQ
CURRENT
POWER
1 L ->1242.0 rpm
I
FREQ
CURRENT
POWER
11
I
45.00 Hz
80.00 A
75.00 %
I
45.00 Hz
80.00 A
75.00 %
O
45.00 Hz
80.00 A
75.00 %
I
45.00 Hz
80.00 A
75.00 %
I
45.00 Hz
80.00 A
75.00 %
I
45.00 Hz
80.00 A
75.00 %
Control panel