Siemens Simatic Ident Function Manual page 88

Setting parameters for blocks
3.5 Programming the Ident profile
Table 3- 68
Parameter
CMD
EPCID_UID
LEN_ID
PSWD
Table 3- 69
Parameter
CMD
EPCID_UID
LEN_ID
PSWD
LOCK_TAG_
BANK_ACTION
LOCK_TAG_
BANK_MASK
Table 3- 70
Parameter
CMD
EDIT_BLACKLIST_MODE
EPCID_UID
LEN_ID
If "EDIT_BLACKLIST_MODE" = 0x00 or 0x02 was selected, the EPC-ID including the ID length
1)
must be specified.
88
KILL-TAG (RF61xR/RF68xR only)
Value / description
0x6A
EPC-ID
0x00 ≙ unspecified single tag access
Length of the previous EPC-ID (2-62 bytes)
0x00 ≙ unspecified single tag access
Password
must be ≠ 0x00
LOCK-TAG-BANK (RF61xR/RF68xR only)
Value / description
0x79
EPC-ID
0x00 ≙ unspecified single tag access
Length of the EPC-ID (2-62 bytes)
0x00 ≙ unspecified single tag access
Password
0x00 ≙ no password
See EPC standard
See EPC standard
EDIT-BLACKLIST (RF61xR/RF68xR only)
Value / description
0x7A
0x00 ≙ add EPC-ID
•
0x01 ≙ Add all "Observed" transponders
•
0x02 ≙ Delete EPC-ID
•
0x03 ≙ delete all
•
EPC-ID
0x00 ≙ unspecified single tag access
Length of the EPC-ID (2-62 bytes)
0x00 ≙ unspecified single tag access
1)
Ident profile and Ident blocks, standard function for Ident systems
Function Manual, 10/2018, C79000-G8976-C387-04