Setting parameters for blocks
3.1 Overview of the Ident library
Ident device
RF18xC
Ident blocks
Ident profile
RF600 (RF61xR/RF68xR)
Ident blocks
Ident profile
MV400/MV500
Ident blocks
Ident profile
16
Supported blocks/commands
Config_Download
•
Config_Upload
•
Set_Param
•
AdvancedCMD
•
Depending on the connected end device, the blocks/commands
of the respective devices are supported by the reader interface
(the module):
General reader
•
READER-STATUS
•
READ-CONFIG
•
WRITE-CONFIG
•
Depending on the connected end device, the blocks/commands
of the respective devices are supported by the reader interface
(the module):
General reader
•
Config_Download
•
Config_Upload
•
Set_Param
•
AdvancedCMD
•
PHYSICAL-READ
•
PHYSICAL-WRITE
•
READER-STATUS
•
INVENTORY
•
WRITE_ID
•
KILL-TAG
•
LOCK-TAG-BANK
•
EDIT-BLACKLIST
•
GET-BLACKLIST
•
READ-CONFIG
•
WRITE-CONFIG
•
Set_MV_Program
•
AdvancedCMD
•
Reset_MV
•
Read_MV
•
PHYSICAL-READ
•
PHYSICAL-WRITE
•
WRITE-CONFIG
•
Ident profile and Ident blocks, standard function for Ident systems
Function Manual, 10/2018, C79000-G8976-C387-04