Siemens Simatic Ident Function Manual page 15

Position
Note
Parallel operation using Ident blocks and Ident profile is not possible
Note that the reader cannot be operated at the same time using the Ident blocks and the
Ident profile.
Blocks/commands supported by Ident devices
The following table provides an overview of the blocks and commands supported by the
Ident devices.
Table 3- 2
Ident device
ASM 456
Ident blocks
Ident profile
RF170C/RF180C
Ident blocks
Ident profile
Ident profile and Ident blocks, standard function for Ident systems
Function Manual, 10/2018, C79000-G8976-C387-04
Block name
IID_INVENT_
00_MOBY_U
IID_INVENT_
82_83_RF600
IID_INVENT_
85_RF600
IID_INVENT_
8x_9x_RF6_D
IID_INVENT_
A0_A1_RF600
Supported blocks/commands
Supported blocks/commands
Depending on the connected end device, the blocks/commands
of the respective devices are supported:
•
•
Depending on the connected end device, the blocks/commands
of the respective devices are supported:
•
Description
Data types for the result of "Inventory" with the
relevant attribute.
The data types help you to interpret the data
received from the reader and to process the
data further directly without data type conver-
sions.
RF600
General reader
General reader
Setting parameters for blocks
3.1 Overview of the Ident library
15