Starting The Wedit Editor - Siemens SINUMERIK 840C Operator's Manual

6 Programming
6.2.7.1

Starting the WEdit editor

© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
The WEdit editor can be used to edit NCK files on hard disk and part
programs in the NCK memory:
• Use the DATA AREA key to select Area Switchover.
• Select the Data Management command from the Programming menu.
Fig. 6-20 WEdit NC editor
• Use the EDIT and ARROW keys to select the file to be edited. To create a
new file, select the file name "untitled".
• Selecting the EDIT softkey starts WEdit and opens the selected file.
Machine manufacturer
Cycles on the hard disk and in the NCK memory can only be edited if the
cycle disable is not active.
6FC5198-6AA60-0BP1
01.99
6-35