Siemens SIMATIC HMI Operating Instructions Manual page 132

Configuring the operating system
6.2 WLAN
①
②
③
④
Procedure for creating a WLAN network, parameterize the WLAN network and establish a connection
1. If you want to create a new WLAN network, select "Add New".
2. If you want to configure an existing WLAN network or connect the HMI device to a WLAN
network, select the desired network.
3. Use the "Configure" or "Connect" button to open the "Wireless Network Properties" dialog
box.
132
"Add New" entry
Existing and parameterized WLAN networks
Status information, shows the WLAN network to which the HMI device is connected
Signal strength of the selected network
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01