Legend
Description
2
In addition to part programs and OEM cycles, can be set via
MD 18353: $MM_M_FILE_MEM_SIZE.
3
SIEMENS cycles
4
Reserved
5
RAM in NCK
6
RAM in NCK, contains the system and user data accessed by the
NCK during program execution.
Numbers for tools, frames, etc., are set by default.
7
Additional memory (optional)
Memory display
The memory available in the NCK is displayed on the user interface, e.g., HMI Advanced,
under: Commissioning > NC > NC memory.
See also
Import licensing terms (Page 227)
CNC Part 1 (NCK, PLC, drive)
Commissioning Manual, 11/2006, 6FC5397-2AP10-2BA0
NCK start-up
10.3 Memory configuration
User
User
Siemens AG
Siemens AG
User
User
Available to users as an option and
can be used for RAM in NCK or for
part programs and cycles.
117