Toshiba G3 Instruction Manual page 40

Chapter 3 Setting
Associate I/O Node number in [Module Parameters]-[I/O Adapter] tab.
Select [I/O Adapter] tab, and enter I/O Node No.
Set I/O loop scan speed for G3 I/O
28
6F8C1590
Figure 3-10 Setting I/O Node numbers to I/O adapters
Note
• No I/O variable (input) can be registered to G3I/O module unless this setting is done.
• This setting cannot be changed after I/O variables are registered.
Select [I/O Adapter] tab, and set G3 I/O loop scan speed
Figure 3-11 Setting I/O loop scan speed to I/O adapters