Handling of Plug-In Modules
4.1 Installation, Removal, Replacement
4.1
Installation, Removal, Replacement
Fasteners
4.1.1
The fasteners of the plug-in modules are shown in the following figure regarding the example of an installed
module and an empty, covered slot.
[le_fxing_elements, 1, --_--]
Figure 4-1
(1)
EMC spring contact
(2)
Fastening screw
(3)
Cut-out for prying out the modules
(4)
Plug-in module
(5)
Fastening screw
(6)
Cover plate
4.1.2
Installation
NOTE
i
i
Reordered modules are not contained in the original device configuration. Use DIGSI to perform the corre-
sponding extension in the Hardware and Protocols Editor.
Preparing Installation
!
DANGER
Danger due to live voltage when installing the plug-in modules.
Noncompliance with the safety notes will result in death or severe injuries.
Install plug-in modules on the electrically deactivated device only.
²
46
Fasteners
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-7, Edition 06.2016