Displaying Indications - Siemens SIPROTEC 5 Operation Manual

V7.30 and higher
Hide thumbs Also See for SIPROTEC 5:
Table of Contents

Advertisement

Menu Path (Project)
Project → Device → Device information → Log →
To read the indications with DIGSI 5 your PC must be connected via the USB user interface of the on-site
²
operation panel or via an Ethernet interface of the device. A direct connection to your PC can be estab-
lished via the Ethernet interfaces. It is also possible to access all connected SIPROTEC 5 devices via a data
network from your DIGSI 5 PC.
To reach the desired logs of the SIPROTEC 5 device, use the project-tree window. If you have not set up
²
the device within a project, you can also attain this via Online access.
After selecting the desired log, you are shown the last state of the log loaded from the device. To update,
²
it is necessary to synchronize with the log in the device.
To execute a synchronization with the logs, click the respective button in the headline of the log (see
²
example of ground-fault log in
[scgrflmd-191012-01, 1, en_US]
Figure 8-7
You will find additional information about the deletion and saving of logs in chapter
²
Deleting the
To determine a relative time for all other indications, you can reference the display of log entries, if
²
needed, to the real time of a certain entry. The real-time stamps of events remain unaffected.
For this purpose click the respective button in the headline of the log (see example of ground-fault log in
²
Figure 8-7
Setting Relative Time Reference
Which indications in the selected log can be displayed depends on the assignments in the DIGSI 5 infor-
²
mation routing matrix or is predefined. You will find information about this in chapter

Displaying Indications

8.4.4
Displayed indications in DIGSI 5 and on the on-site operation panel are supplemented with the following infor-
mation:
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-7, Edition 06.2016
Figure 8-7
DIGSI 5 Display of an Indication List (Example of Ground-Fault Log)
Logs.
a)).
a)).
Operation in the Operating State
8.4 Indications
Log
Security indication
Device diagnosis
Communication indications
8.4.6 Saving and
8.4.5.1
General.
115

Advertisement

Table of Contents
loading

Table of Contents