4. Create a back-up file of the new configuration settings (optional but
recommended).
Repeat steps 2 to 4 for each of the Access Points RLMs that you wish to
install.
For installation instructions of the RLM hardware, please refer to the
documentation that was includeded with the RLM.
To connect to the Radio Link Module, you need to address each Radio Link
Module via its IP address.
•
If your network includes a BOOTP or DHCP server, the IP address will be
assigned automatically (refer to BOOTP and DHCP (page 231) for more
information about BOOTP/DHCP).
•
In situations where no IP addresses are assigned automatically, the LM
factory default IP address will be 153.69.254.254.
You must change this factory-set IP address (153.69.254.254) upon first
configuration.
60
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01