Siemens CP 1515 User Manual page 259

When uploading RLM software (or firmware) no changes are made to the
configuration of the RLM. However, it is recommended to create a back-up
file using the
backup-file exist of the current configuration setting.
1. Select the target Radio Link Module from the list or enter an IP address
for a specific Radio Link Module.
2. From the Radio Link Module menu, select
The RLM Manager program will prompt you to open an Access Point
RLM software file (*.bin).
3. Move to the directory where you have installed the RLM Manager
program file, or the directory where you saved the Access Point RLM
software file you downloaded from the Siemens SIMATIC NET IWL
web site.
4. From the list of displayed files, select the file "wpntxxx.bin" , where "xxx"
identifies the version of the Access Point RLM software.
5. Click the
6. Enter the password for the RLM if you are prompted to and click
continue.
7 . When prompted to confirm the RLM software upload, click
!
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
button to open the Radio Link Module software file.
from the RLM menu in case no
.
to
.
259