Table of Contents
Advertisement
To connect a wireless station to the SIMATIC NET Industrial Wireless LAN
network, each station must be configured with the same Network Name as
the Radio Link Module.
To configure the wireless stations, follow the instructions as described in the
documentation that comes with your PC card CP 1515.
To install and configure the RLM perform the following steps:
1. Install the Radio Link Module hardware
2. Connect to the RLM with the RLM Manager program.
3. Set the Network Name and save configuration to the Radio Link Module.
1. Subject to the decisions you made in Setting Up your LAN Administrator Station (page 32),
you may either install the Access Points RLMs at your desk and configure them one by one,
or have the Access Points RLMs mounted directly in their various locations prior to
configuring them via a network connection.
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
(1)
.
1
59
Advertisement
Table of Contents
