Siemens Simatic Operating Instructions Manual page 91

Setting the communication parameters
Select the transmission rate for the communication.
Figure 9-16
Configuring transmit/receive messages
1. Double-click "Transmit message" or "Receive message"
corresponding message type is placed as a submodule in the "CAN transparent" module.
2. Create the necessary message definitions
Figure 9-17
SIMATIC PN/CAN LINK
Operating Instructions, 03/2018, A5E39895388-AB
Transmission rate
Transmit and receive messages
Configuring / programming
9.3 Configuring CAN transparent
①
in the HW catalog. The
②
.
89