Configuration View In The Tia Portal - Siemens Simatic Operating Instructions Manual

Configuring / programming
9.1 Configuring CANopen Manager
9.1.2

Configuration view in the TIA Portal

TIA Portal: Devices & networks
Follow these steps:
1. Select the PN/CAN LINK with its specific article number from the HW catalog
PN/CAN LINK appears in the "Devices & networks" window.
2. Connect the CPU and PN/CAN LINK by means of a PROFINET connection.
CPU and PN/CAN LINK are connected in the "Devices & networks" window with a green
PN line
3. Assign the parameters of the PROFINET interface of the PN/CAN LINK
the configuration of your PROFINET network.
Figure 9-1
76
②
.
TIA Portal: Devices & networks
SIMATIC PN/CAN LINK
Operating Instructions, 03/2018, A5E39895388-AB
①
. The
③
according to