Bosch AMC2 Installation Manual page 10

10 en | Introduction
Figure 3.4: Overview - Interfaces
Notice!
All connectors, with the exception of the RS-232 and Ethernet host interface, are pluggable
screw clamp terminals.
Figure 3.5: Jumper at the bottom side
2018-02 | AMC2-4R4 |
13 RS-485 extension module bus
14 External tamper contact
15 Connector for power supply
16 RS-485 interfaces for up to 8 card readers
17 Connectors for eight analog inputs
18 Connectors for eight relay outputs
Installation Manual
AMC2 Modular Controller
Bosch Access Systems GmbH