Introduction - Kenwood TS-890S Setting Manual

1. Introduction

TS-890S can be operated remotely via a home LAN and the Internet by using the remote
control software ARCP-890 and KENWOOD NETWORK COMMAND SYSTEM (KNS).
There are several operation styles for remote operation. In this document, we will explain the
features of each operation style, the system configuration method, setting method, etc. in
detail.
Important
For remote operation via networks, knowledge not only of transceivers but also of PCs and

networks is required. JVC KENWOOD does not offer support for customer PCs and
Networks. Furthermore, for operations relating to actual transmitting, note that procedures
according to the Radio Act are also required.
Operations via networks may be delayed due to unavoidable principles. Consequently, do

not perform operations (such as contests or pile-ups requiring quick responses) for which
delays are likely to be a problem.
Even if you set by the procedures described in this document, the feature may not work

properly because of the combination of PC, the network environment and the sound
device.
Please understand the contents of chapter "6. Limitations" and "7. Cautions", then start

remote operation.